1/1

The craft of stonemasonry (or stonecraft) has existed since humanity could use and make tools[citation needed] - creating buildings, structures, and sculpture usingstone from the earth. These materials have been used to construct many of the long-lasting, ancient monuments, artifacts, cathedrals, and cities in a wide variety of cultures. Famous works of stonemasonry include the Taj Mahal, Cusco's Incan Wall, Easter Island's statues, the Egyptian Pyramids, Angkor Wat, Borobudur,Tihuanaco, Tenochtitlan, Persepolis, the Parthenon, Stonehenge, and Chartres Cathedral.

 

Kansas City Brick & Masonry is the craft of shaping rough pieces of rock into accurate geometrical shapes, at times simple, but some of considerable complexity, and then arranging the resulting stones, often together with mortar, to form structures.

 

  • Quarrymen split veins, or sheets of rock, and extract the resulting blocks of stone from the ground.

  • Sawyers cut these rough blocks into cuboids, to required size with diamond-tipped saws. The resulting block if ordered for a specific component is known as sawn six sides (SSS).

  • Banker masons are workshop based, and specialize in working the stones into the shapes required by a building's design, this set out on templets and a bed mould. They can produce anything from stones with simple chamfers to tracery windows, detailed mouldings and the more classical architectural building masonry. When working a stone from a sawn block, the mason ensures that the stone is bedded in the right way, so the finished work sits in the building in the same orientation as it was formed on the ground. Occasionally though some stones need to be orientated correctly for the application; this includes voussoirs, jambs, coping sand cornice. 

The basic tools, methods and skills of the banker mason have existed as a trade for thousands of years.

  • Carvers cross the line from craft to art, and use their artistic ability to carve stone into foliage, figures, animals or abstract designs.

  • Fixer masons specialize in the fixing of stones onto buildings, using lifting tackle, and traditional lime mortars and grouts. Sometimes modern cements, mastics and epoxy resins are used, usually on specialist applications such as stone cladding. Metal fixings, from simple dowels and cramps to specialised single application fixings, are also used. The precise tolerances necessary make this a highly skilled job.

  • Memorial masons or monumental masons carve gravestones and inscriptions.

 

The modern stonemason undergoes comprehensive training, both in the classroom and in the working environment. Hands-on skill is complemented by intimate knowledge of each stone type, its application and best uses, and how to work and fix each stone in place. The mason may be skilled and competent to carry out one or all of the various branches of stonemasonry. In some areas the trend is towards specialization, in other areas towards adaptability.

 

 

Types of Stonemasonry

 

Rubble Masonry

When roughly dressed stones are laid in a mortar the result is a stone rubble masonry.

 

Ashlar Masonry

Stone masonry using dressed (cut) stones is known as ashlar masonry.

 

Stone Veneer

Stone veneer is used as a protective and decorative covering for interior or exterior walls and surfaces. The veneer is typically 1 inch (2.54 cm) thick and must weigh less than 15 lb per square foot (73 kg m−2) so that no additional structural supports are required. The structural wall is put up first, and thin, flat stones are mortared onto the face of the wall. Metal tabs in the structural wall are mortared between the stones to tie everything together, to prevent the stonework from separating from the wall.

 

Slipform Stonemasonry

Slipform stonemasonry is a method for making stone walls with the aid of formwork to contain the rocks and mortar while keeping the walls straight. Short forms, up to two feet tall, are placed on both sides of the wall to serve as a guide for the stone work. Stones are placed inside the forms with the good faces against the form work. Concrete is poured behind the rocks. Rebar is added for strength, to make a wall that is approximately half reinforced concrete and half stonework. The wall can be faced with stone on one side or both sides.

CALL (816) 500-4198 TODAY, MAKE YOUR MASONRY, KANSAS CITY BRICK & MASONRY